Product Name: Sodium Piperidine-1-Carbodithioate
Chemical Family: Dithiocarbamates
CAS Number: 4911-10-0
Synonyms: Sodium piperidinecarbodithioate, Piperidine-1-carbodithioic acid, sodium salt
Recommended Use: Chemical synthesis, laboratory reagent, industrial additive
Supplier Contact: Refer to provider’s safety office
Emergency Phone Number: Refer to supplier’s emergency procedures or national chemical safety hotline
GHS Classification: Acute toxicity (oral, inhalation, dermal), Skin and eye irritation, Specific target organ toxicity
Signal Word: Warning
Hazard Statements: Harmful if swallowed or inhaled, causes skin and eye irritation, may cause organ damage through prolonged or repeated exposure
Pictograms: Exclamation mark, health hazard
Precautionary Statements: Avoid breathing dusts, use protective gear, wash exposed skin thoroughly after handling, seek medical attention in case of symptoms
Chemical Name: Sodium Piperidine-1-Carbodithioate
CAS Number: 4911-10-0
EC Number: 207-728-3
Concentration: ≥98% (pure form)
Impurities: Trace levels of water, sodium salts, organic residues
Eye Contact: Rinse cautiously with water for minutes; remove contact lenses if present; continue rinsing; seek ophthalmologic care immediately
Skin Contact: Remove contaminated clothing; wash skin with soap and water; seek medical attention if irritation persists
Inhalation: Remove person to fresh air; keep comfortable for breathing; seek medical advice if symptoms occur
Ingestion: Rinse mouth thoroughly with water; do not induce vomiting; obtain medical care right away
Notes for Physicians: Treat symptomatically; monitor for allergic reactions and systemic toxicity
Suitable Extinguishing Media: Water spray, dry chemical, carbon dioxide, foam
Unsuitable Media: Direct water streams
Hazards: May emit toxic fumes like sulfur oxides, nitrogen oxides, carbon monoxide, sodium oxides
Protective Equipment for Firefighters: Self-contained breathing apparatus, full protective clothing
Special Procedures: Cool exposed containers, prevent runoff into drains or water sources
Personal Precautions: Evacuate area, ensure adequate ventilation, use proper personal protective gear
Spill Response: Absorb spill with inert material such as sand; collect in closed, labeled containers for disposal
Environmental Precautions: Prevent material from entering sewers, surface water, or ground water
Cleanup: Ventilate area, avoid dust formation, clean thoroughly to prevent residue buildup
Handling: Use chemical fume hood, minimize dust generation, wash hands after handling, avoid contact with skin and eyes
Storage Conditions: Store in tightly closed containers, keep in dry, cool, well-ventilated environment, keep away from acids, oxidizers, and moisture
Incompatible Materials: Strong acids, oxidizing agents, strong bases
Engineering Controls: Laboratory fume hoods, local exhaust ventilation, process enclosures
Personal Protective Equipment: Chemical-resistant gloves (nitrile or neoprene), lab coats, safety goggles, face shield for large quantities
Respiratory Protection: NIOSH-approved respirator for dust or mists if exposure limits are exceeded
Occupational Exposure Limits: No specific limits established, use general dust exposure guidelines
Physical State: Solid (crystalline powder)
Color: White to pale yellow
Odor: Characteristic amine odor
Melting Point: Decomposes above 320°C
Boiling Point: Not applicable (decomposes)
Solubility: Soluble in water, slightly soluble in alcohols
Density: 1.13 g/cm³ (estimated)
pH (solution): Alkaline
Vapor Pressure: Negligible at ambient temperatures
Partition Coefficient (n-octanol/water): Data not available
Stability: Stable under recommended storage and handling conditions
Hazardous Reactions: Reacts with acids to liberate toxic gases
Decomposition Products: Sulfur oxides, nitrogen oxides, carbon monoxide, sodium oxides
Incompatible Materials: Acids, oxidizers, moisture
Likely Routes of Exposure: Inhalation, ingestion, skin, and eye contact
Acute Effects: Irritation to skin, eyes, and respiratory tract; may cause gastrointestinal discomfort
Chronic Effects: Prolonged exposure may damage liver, kidneys, or cause allergic reactions
LD50 (oral, rat): Data not available, similar dithiocarbamates range from 800-1000 mg/kg
Carcinogenicity: Not listed as carcinogenic by IARC, NTP, or OSHA
Mutagenicity: Information not available
Ecotoxicity: Harmful to aquatic life, may cause long-term damage in aquatic environments
Persistence and Degradability: Not readily biodegradable, persistent in environment
Bioaccumulation Potential: Data lacking, structure suggests low bioaccumulation
Mobility in Soil: Estimated moderate mobility, soluble in water
Other Adverse Effects: Releases toxic breakdown products in water, impacts on microbial life possible
Disposal Methods: Dispose of in accordance with local, state, and national regulations; incineration in authorized facility preferred
Contaminated Packaging: Triple rinse containers, dispose as hazardous waste
Special Precautions: Do not release into environment or drains
UN Number: Not assigned
UN Proper Shipping Name: Not regulated for transport
Transport Hazard Class: Not classified
Packing Group: Not categorized
Marine Pollutant: Avoid waterway release
Special Precautions for User: Use original packaging or UN-approved containers, secure shipment to prevent spillage
US Regulations: Subject to TSCA inventory, SARA Title III Section 313 reporting not required
EU Regulations: Registered under REACH, not classified as SVHC
Other International Regulations: WHMIS classification applies, Japanese and Australian chemical inventories subject to local laws
Labeling Requirements: GHS-compliant labeling with hazard pictograms and statements required
