Product Name: Aminopyrrolidine
Chemical Family: Heterocyclic amine
Synonyms: 2-Aminopyrrolidine, Pyrrolidine-2-amine
CAS Number: 123456-78-9
Recommended Use: Chemical synthesis, research
Supplier Information: Name, address, phone number of the manufacturer or supplier
Emergency Contact: Organization/number for chemical incidents
GHS Classification: Acute toxicity (oral, dermal, inhalation), skin irritation, serious eye irritation, specific target organ toxicity
Signal Word: Danger
Hazard Statements: May be harmful if swallowed, causes skin and eye irritation, toxic if inhaled, may cause central nervous system effects, suspected of causing genetic defects
Pictograms: Skull and crossbones, exclamation mark, health hazard
Precautionary Statements: Wear protective gear, avoid inhalation, wash hands after use, keep away from children, use only in well-ventilated places, avoid inhaling dust or vapors
Chemical Name: Aminopyrrolidine
CAS Number: 123456-78-9
Concentration: >98% (pure substance)
Impurities: Trace residual solvents or byproducts depending on synthesis route
Mixture: Not applicable; single substance in most research or industrial uses
Inhalation: Move person to fresh air. If breathing slows or stops, provide artificial respiration. Seek medical help immediately. Do not leave affected person unattended.
Skin Contact: Wash skin with running water and soap for fifteen minutes. Take off any contaminated clothing. Seek medical attention if skin irritation persists. Discard contaminated clothing safely.
Eye Contact: Rinse cautiously with water for several minutes, holding eyelids open. Remove contact lenses if present and easy to do. Keep rinsing. Call a doctor right away.
Ingestion: Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Get immediate medical aid.
Suitable Extinguishing Media: Use dry chemical, carbon dioxide, water spray, or foam. Pick extinguishers that suit surrounding fire.
Specific Hazards Arising from the Chemical: Produces toxic fumes including nitrogen oxides and carbon monoxide when burned. Vapors can form explosive mixtures with air.
Protective Equipment: Wear self-contained breathing apparatus and full protective clothing. Do not breathe smoke or fumes.
Firefighting Advice: Approach from upwind. Cool containers with water spray to prevent rupture. Avoid run-off entering drains.
Personal Precautions: Evacuate area and ventilate. Wear proper protective gear. Avoid breathing vapors or dust. Stay upwind.
Environmental Precautions: Prevent entry into drains, sewers, or water sources. Report significant spills to local authorities right away.
Cleanup Methods: Absorb with inert material (sand, earth, vermiculite). Sweep or shovel into suitable containers. Wash spill area with water and detergent. Dispose of contaminated materials by regulation.
Handling: Avoid contact with skin, eyes, and clothing. Don chemical-resistant gloves and goggles. Handle in a well-ventilated fume hood. Keep container tightly closed during use. Wash hands thoroughly after handling. Never eat, drink, or smoke near chemical use areas.
Storage: Store in a cool, dry, and well-ventilated place. Keep away from heat, ignition sources, acids, and oxidizing materials. Use proper containers, clearly labeled, and check regularly for leaks or damage. Limit access to authorized trained personnel.
Occupational Exposure Limits: No established exposure limits, but minimize exposure.
Engineering Controls: Use local exhaust ventilation or chemical fume hood. Emergency eye wash stations and safety showers should be accessible.
Personal Protective Equipment: Wear protective gloves (nitrile or neoprene), chemical splash goggles or face shield, lab coat or apron, suitable dust mask or respirator if airborne particulate levels rise. Remove contaminated clothing right away. Clean protective gear regularly.
Appearance: White to pale-yellow solid, crystalline powder
Odor: Mild amine scent, can become pungent on decomposition
Odor Threshold: Not determined
pH: Slightly basic in water solution
Melting Point/Freezing Point: Around 90-110°C (specific range depends on purity and isomer)
Boiling Point: Estimated near 225°C under atmospheric pressure
Flash Point: Not flammable at room temperature
Evaporation Rate: Not applicable (solid at room temperature)
Flammability: Not highly flammable but can ignite under strong heat or open flame
Vapor Pressure: Low at ambient conditions
Vapor Density: Heavier than air
Solubility: Moderate solubility in water and ethanol
Partition Coefficient (Octanol/Water): Not readily available; expected to favor water phase
Auto-ignition Temperature: Not established
Decomposition Temperature: Begins decomposing above boiling point
Viscosity: Not applicable to solids
Chemical Stability: Stays stable at standard temperatures and pressures. Decomposes if heated strongly.
Conditions to Avoid: Strong heat, moisture, open flames, oxidizers, acids.
Incompatible Materials: Oxidizing agents, strong acids, acid chlorides.
Hazardous Decomposition Products: May release toxic nitrogen oxides or carbon monoxide when burned or decomposed.
Polymerization: No hazardous polymerization under normal storage conditions.
Acute Toxicity: Harmful if swallowed, inhaled, or through skin. Can cause irritation to eyes, skin, and respiratory system.
Chronic Effects: May target liver, kidneys, and nervous system after repeated exposure. Some data suggest possible mutagenic or reproductive effects.
Routes of Exposure: Absorption through skin, inhalation of dust or vapors, swallowing accidental residue.
Symptoms: Dizziness, headache, skin redness, eye watering or burning, nausea.
Carcinogenicity: Not classified as a known carcinogen by ACGIH, IARC, NTP, or OSHA.
Other Information: No adequate human data, use caution and avoid repeated exposure.
Ecotoxicity: Harmful to aquatic organisms at moderate concentrations. Potential to disturb aquatic environments if released in large amounts.
Persistence and Degradability: Expected to be slowly biodegradable. May tend to persist in soil and water.
Bioaccumulation Potential: Low to moderate—likely to remain in water rather than build up in living things.
Mobility in Soil: Moderate—may move with water through soil.
Other Adverse Effects: No evidence of ozone depletion or global toxicity, but limit chemical release into nature.
Waste Disposal Methods: Follow federal, state, and local rules. Send waste to permitted chemical disposal facility. Use sealed container for transport. Incineration may be appropriate depending on local policy.
Contaminated Packaging: Do not reuse containers. Rinse and send to hazardous waste facility.
Special Instructions: Write clear labels on waste for handlers. Report spills to environmental authorities if required by law. Do not dump down drain or regular trash.
UN Number: 2810 (for toxic organic solids, specific number may differ with updated regulations)
Proper Shipping Name: Toxic solid, organic, n.o.s. (Aminopyrrolidine)
Transport Hazards Class: 6.1 (toxic substance)
Packing Group: II or III depending on concentration and amount
Label Requirements: Toxic substance pictogram
Environmental Hazards: Not classified as marine pollutant unless mixed with other hazardous agents.
Special Precautions: Handle with gloves and avoid damage to packaging during moves.
TSCA Status: Listed or pending under U.S. Toxic Substances Control Act.
SARA Title III: Not specifically listed as extremely hazardous under Section 302, 304, or 313.
OSHA Hazard Category: Acute health hazard, chronic health hazard
WHMIS Classification (Canada): D1B (toxic material causing immediate and serious toxic effects)
Other International Regulations: May be subject to reporting or handling requirements under REACH (EU) or other chemical safety laws.
Labeling Requirements: Employers must display hazard labels, train workers on chemical risks, and maintain access to MSDS documentation onsite.
