Product Name: 1-Boc-2-Piperidone
Synonyms: N-Boc-2-piperidone, tert-Butyl 2-oxo-piperidine-1-carboxylate
CAS Number: 79983-71-4
Recommended Use: Chemical intermediate, research and development
Manufacturer: [Company Name, Address, Emergency Phone Number]
Email Contact: [Safety Officer or Responsible Person's Email]
Physical Hazard: Not classified as flammable; can irritate eyes and skin on contact
Health Hazard: May cause respiratory and skin sensitization; inhalation might irritate mucous membranes; ingestion could create gastrointestinal discomfort
Environmental Hazard: Not expected to cause long-term environmental impact, but never allow spillage into waterways
GHS Label Elements: Exclamation mark symbol; warning for irritation to skin, eyes, and respiratory system
Signal Word: Warning
Hazard Statements: H315: Causes skin irritation; H319: Causes serious eye irritation; H335: May cause respiratory irritation
Precautionary Statements: Wear suitable protective gear; avoid breathing dust and vapors; wash hands thoroughly after handling
Chemical Formula: C10H17NO3
Component: 1-Boc-2-Piperidone
Purity: Over 95% (typically for laboratory-grade samples)
Impurities: Traces of related piperidone compounds possible
Molecular Weight: 199.25 g/mol
Additives: None reported for standard material
Inhalation: Remove person to fresh air; offer oxygen if breathing is difficult; seek medical attention if symptoms persist
Skin Contact: Rinse area immediately with plenty of water; remove contaminated clothing; wash thoroughly with soap; monitor for irritation
Eye Contact: Flush eyes gently with running water for several minutes; hold eyelids apart; remove contact lenses if present and easy to do; seek medical help if redness or pain continues
Ingestion: Rinse mouth with water; never induce vomiting unless advised by medical personnel; seek immediate medical advice
Notes to Physician: Treat symptomatically; check for delayed effects especially for allergic reactions
Suitable Extinguishing Media: Use water spray, dry chemical, foam, or carbon dioxide
Hazardous Combustion Products: Carbon monoxide, carbon dioxide, nitrogen oxides, possibly irritating organic vapors
Special Protective Equipment: Firefighters should wear self-contained breathing apparatus and full protective gear
Fire or Explosion Hazards: Dust clouds may ignite under rare conditions; avoid open flames
Firefighting Instructions: Evacuate area; cool containers exposed to fire with water mist to prevent rupture; prevent run-off from entering drains
Personal Precautions: Wear respirator, gloves, goggles, and lab coat; evacuate nonessential personnel; avoid breathing dust or vapors
Spill Cleanup: Sweep up powder carefully without creating dust; use HEPA vacuum for large spills or damp mop small amounts; place in clearly labeled, tightly closed container for legal disposal
Environmental Precautions: Do not let material enter the environment; prevent release into soil, surface water, and drains
Disposal: Collect solid material and contaminated tools for hazardous waste disposal under local rules
Handling: Avoid skin and eye contact; never eat, drink, or smoke while handling this material; use fume hood or well-ventilated area; wash hands and exposed skin after use
Storage: Keep container tightly closed in a cool, dry, well-ventilated place; store away from strong oxidizers and acids; protect from moisture and direct sunlight; check for container damage regularly
Incompatible Materials: Strong acids, oxidizing agents
Personal Hygiene: Remove and wash contaminated clothing after use
Engineering Controls: Work in a chemical fume hood; keep local exhaust ventilation running during use; monitor air for dust and vapors
Personal Protection: Wear chemical-resistant gloves (nitrile or rubber), splash goggles, lab coat or apron, and dust mask or respirator if airborne dust anticipated
Respiratory Protection: Use dust/powder mask (NIOSH approved) if exposure could occur above recommended levels
Workplace Monitoring: No occupational exposure limits established; air quality checks recommended for bulk handling
Environmental Controls: Avoid spillage into drains; use containment mats for larger operations
Appearance: White to off-white crystalline powder
Odor: Faint, organic odor (not pungent or bitter)
Odor Threshold: No specific data reported
pH: Not determined in aqueous solution
Melting Point: Between 72°C and 76°C
Boiling Point: Not easily distilled; decomposes on heating
Flash Point: >110°C (estimated)
Evaporation Rate: Not applicable, low volatility
Solubility: Sparingly soluble in water; readily soluble in most organic solvents like dichloromethane, ethyl acetate, methanol
Vapor Pressure: Negligible at room temperature
Vapor Density: Not determined
Relative Density: Approx. 1.1 g/cm³
Partition Coefficient: Not available
Auto-Ignition Temperature: Not determined
Decomposition Temperature: May decompose above 130°C
Viscosity: Not applicable in solid form
Chemical Stability: Stable under proper storage conditions (cool, dry, away from light); may degrade with high heat or direct sunlight
Reactive With: Strong oxidizing agents, strong acids
Conditions to Avoid: High temperature, sparks, direct flame, humidity
Hazardous Decomposition: Burning produces carbon oxides, nitrogen oxides, other toxic vapors
Polymerization: Hazardous polymerization not known to occur
Acute Toxicity: Oral and dermal toxicity data limited; not expected to be acutely toxic in small laboratory quantities; handle with usual chemical caution
Skin Sensitization: May cause localized redness, swelling, or itching on direct contact
Eye Effects: Dust or splashes might cause mild to moderate irritation
Chronic Effects: Repeated skin contact may result in sensitization or dermatitis over time
Target Organs: Not specifically known; primary hazard is skin and eye irritation
Carcinogenicity: No long-term cancer data; no known carcinogens in chemical structure
Mutagenicity and Teratogenicity: Not studied; no information available
Inhalation Hazard: Airborne powder might cause coughing, upper airway irritation
Persistence and Degradability: Degradation data unknown; organic compound likely to degrade slowly by chemical or biological means
Bioaccumulation: No significant evidence for bioaccumulation in aquatic organisms
Ecotoxicity: No measured aquatic toxicity; as a precaution, avoid disposal into sewers or open water
Mobility in Soil: Limited mobility due to low water solubility; may leach through soil if large amounts mishandled
Other Effects: Not known to disrupt ecosystems at lab scale; still best to contain and capture all residues
Waste Disposal Methods: Dispose of as hazardous laboratory waste through licensed chemical disposal contractor; incineration preferred if allowed
Contaminated Containers: Rinse thoroughly before recycling or disposal; follow local hazardous waste protocols
Legal Restrictions: Observe all federal, state, and local environmental regulations regarding hazardous chemical disposal; never flush into drains
UN Number: Not classified (no hazardous class for air, sea, or ground shipment in small amounts)
Proper Shipping Name: Not regulated as a dangerous good
Transport Hazard Class: Not assigned
Packing Group: Not assigned
Special Precautions: Avoid rough handling and rapid temperature changes during shipping; package in tight, sealed containers to avoid leaks
Labeling Requirements: Use caution label for laboratory chemical when shipping outside supplier network
International Inventory: May be listed on TSCA, REACH, or other chemical inventories; check specific country database
US Federal Regulations: Not subject to reporting requirements under SARA Title III, CERCLA
State Regulations: No California Proposition 65 listed chemicals; check state-specific databases before use
EU Regulatory Information: Not classified as hazardous under current EU regulations for chemicals in small-scale use; safety and use restricted to research professionals
Labeling for Laboratory Use: “Lab use only – not for drug, food, cosmetic, or household use”
