Product Name: 2-Octyldodecyl 5-Oxo-L-Prolinate
Chemical Family: Fatty Acid Ester
Chemical Formula: C24H45NO3
CAS Number: 1112267-13-7
Synonyms: Prolinate, 2-Octyldodecyl Ester
Recommended Use: Cosmetic ingredient, emollient
Manufacturer: Contact supplier or local distributor for details
Emergency Contact: In case of emergency, call local poison control or 24-hour chemical emergency service
Address: Refer to product label or safety sheet
Telephone Number: Provided upon request from supplier
GHS Classification: Not classified as hazardous under current GHS criteria
Signal Word: None required
Hazard Statements: No data suggests acute toxicity or chronic effects with normal handling
Precautionary Statements: Use standard good industrial hygiene practices, avoid direct skin and eye contact, use in well-ventilated area
Potential Health Effects: May cause slight irritation to sensitive skin or eyes, not considered sensitizing, accidental ingestion unlikely to cause issues at small quantities
Environmental Hazards: Not anticipated to present serious hazards under normal conditions, high quantity spills may create slippery surfaces
Other Hazards: Avoid release to soil or water in large quantities
Chemical Name: 2-Octyldodecyl 5-Oxo-L-Prolinate
CAS Number: 1112267-13-7
Concentration: 98% minimum purity
Impurities: Trace quantities of process solvents or by-products, typically less than 2% by weight
Stabilizers/Additives: None added
Inhalation: Move to fresh air, seek medical attention if symptoms persist
Skin Contact: Wash skin thoroughly with soap and water, seek medical advice if redness or irritation develops
Eye Contact: Rinse cautiously with water for several minutes, remove contact lenses if present and easy to do, continue rinsing
Ingestion: Rinse mouth with water, do not induce vomiting, seek medical attention if feeling unwell
Advice for Medical Personnel: Treat symptomatically, no specific antidote
Suitable Extinguishing Media: Dry chemical, CO2, alcohol-resistant foam, water spray
Unsuitable Extinguishing Media: Do not use water jet as it may spread the fire
Specific Hazards: May emit smoke, carbon monoxide, carbon dioxide, nitrogen oxides upon combustion
Protective Equipment for Firefighters: Full protective gear, self-contained breathing apparatus
Special Procedures: Prevent runoff from firefighting entering drains or waterways
Personal Precautions: Wear suitable protective clothing, gloves, safety goggles
Environmental Precautions: Keep out of drains, surface waters and soil in significant quantities
Scan for Slips: Spilled material becomes very slippery, cordon off affected area
Containment: Absorb with inert materials such as clay, vermiculite, spill pads; do not use combustible absorbents
Cleanup Methods: Collect absorbed material in sealed containers for disposal, wash residue with plenty of water and detergent
Disposal: Dispose of waste in compliance with local, regional and national regulations
Safe Handling Notes: Prevent formation of aerosols or dusts, use clean tools, avoid eating, drinking or smoking while using product
Hygiene Requirements: Wash hands and exposed skin after use
Suitable Storage Conditions: Store in sealed, labeled containers away from sunlight, moisture and excessive heat
Temperature Control: Ambient temperature between 5°C and 25°C
Incompatible Materials: Strong acids, strong oxidizing agents
Shelf Life: Check manufacturer specifications for recommended shelf life
Occupational Exposure Limits: No established exposure limits for this substance
Engineering Controls: Work in well-ventilated area, provide eyewash station
Personal Protective Equipment: Use protective gloves made of nitrile or neoprene, wear chemical safety goggles or face shield
Respiratory Protection: Not typically required unless mist or aerosols are generated, consider NIOSH approved mask if ventilation is poor
Other Protective Measures: Wear lab coat or apron, remove contaminated clothing promptly
Appearance: Clear to slightly yellow oily liquid
Odor: Characteristic, mild, fatty odor
Odor Threshold: Not established
pH: Not measurable in water—insoluble
Melting Point/Freezing Point: Approx. -5°C
Boiling Point: > 300°C (estimated)
Flash Point: Above 150°C (closed cup)
Evaporation Rate: Not available
Flammability: Not classified as flammable, but can support combustion
Vapor Pressure: Very low, negligible at 20°C
Vapor Density: Not determined
Solubility: Insoluble in water, soluble in most organic solvents
Partition Coefficient (log Kow): Greater than 5, indicates high lipophilicity
Auto-ignition Temperature: > 350°C
Decomposition Temperature: Not specified
Viscosity: Medium to high viscosity, temperature dependent
Chemical Stability: Stable under normal storage and handling conditions
Conditions to Avoid: Extreme heat, open flames, moisture
Materials to Avoid: Oxidizers, strong acids
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, potential traces of nitrogen oxides
Hazardous Polymerization: Not expected to occur
Likely Routes of Exposure: Skin contact, eye contact, incidental ingestion
Acute Toxicity: Based on available data, substance holds low acute toxicity
Skin Corrosion/Irritation: Non-irritant in standard patch tests, but prolonged contact may lead to dryness or slight irritation
Eye Damage/Irritation: May cause transient irritation with direct exposure
Sensitization: No reports of skin sensitization observed
Carcinogenicity: No data suggests carcinogenic potential
Mutagenicity: No evidence found in standard tests
Reproductive Toxicity: No expected effects under normal use
Repeated Dose Toxicity: No data on chronic toxicity, not expected to bioaccumulate significantly
Ecotoxicity: No acute or chronic hazards anticipated to aquatic life based on chemical structure, but large scale spills may contribute to surface film and reduce oxygen transfer in water
Persistence and Degradability: Product expected to be inherently biodegradable, long chain esters trend toward slow biological breakdown
Bioaccumulation Potential: High log Kow suggests possible accumulation, though not considered significant at standard handling concentrations
Mobility in Soil: Low, substance likely absorbs onto particles in soil
Other Adverse Effects: None known, avoid uncontrolled environmental release
Disposal Methods: Store waste material in sealed, labeled containers
Waste Treatment: Consult regulatory authorities for incineration options or chemical treatment
Do Not Release: Never pour into drains or waterways, avoid disposal in common municipal waste
Contaminated Packaging: Rinse containers with compatible solvent, pass rinsate to waste treatment, recycle or dispose of as hazardous waste
Applicable Regulations: All waste handling should comply with local and international hazardous waste regulations
UN Number: Not regulated under current transport regulations
Proper Shipping Name: Not classified as dangerous goods
Transport Hazard Class: Not applicable
Packing Group: Not applicable
Marine Pollutant: Not anticipates as marine pollutant
Special Precautions: Avoid transport with strong oxidizers or incompatible chemicals
Transport Labeling: Use standard product labeling, no special symbols required
Regulatory Status: Check country-specific regulations to confirm status for cosmetics or chemical manufacturing
TSCA: Listed or notification in progress
REACH: Pre-registered, consult supplier for dossier
Inventory Listings: Product may appear under similar names in various country inventories including Japan ENCS, Korea KECL, China IECSC
Label Requirements: Follow international hazard communication standards
SARA Title III: Not listed as extremely hazardous
California Proposition 65: Does not contain any substances known to the State of California to cause cancer or reproductive harm
Other Regulations: Use according to relevant workplace safety, chemical hygiene, and environmental laws
