Product Name: 1-(O-Chlorobenzyl)-1H-Pyrrole
Chemical Family: Aromatic heterocyclic compound
Synonyms: o-Chlorobenzylpyrrole
Recommended Use: Laboratory chemical, research chemical
Supplier's Details: Chemical manufacturer or distributor information with office address and emergency contact number
Emergency Phone: Specific local and international emergency number for chemical incidents or poison control
GHS Classification: Acute toxicity (oral and inhalation), Skin and eye irritation, Respiratory tract irritation, Environmental hazard—aquatic chronic
Signal Word: Warning
Hazard Statements: Harmful if swallowed or inhaled, causes skin and eye irritation, may cause allergic skin reaction, suspected of causing genetic defects
Pictograms: Exclamation mark, health hazard, environment
Precautionary Statements: Avoid breathing dust or vapors, wash hands thoroughly after handling, use in well-ventilated area, wear protective gloves, protective clothing, eye and face protection
Other Hazards: Combustible; runoff can pollute waterways
Chemical Name: 1-(O-Chlorobenzyl)-1H-Pyrrole
CAS Number: Specific to the compound, typically required for regulatory tracing
EC Number: Provided by relevant authority
Concentration: 95-100%
Impurities: Trace pyrrole, o-chlorobenzyl derivatives, unreacted starting materials
Inhalation: Remove to fresh air immediately, keep patient at rest, seek prompt medical attention if symptoms including coughing, headache, or shortness of breath develop
Skin Contact: Wash affected area using plenty of soap and water, remove contaminated footwear and clothing, seek medical attention if irritation or redness persists
Eye Contact: Flush eyes thoroughly with clean water for a minimum of 15 minutes, lifting eyelids occasionally, seek medical advice urgently if irritation or visual impairment occurs
Ingestion: Rinse mouth and seek immediate medical attention, avoid inducing vomiting unless instructed by poison control or medical professional
Most Important Symptoms: Irritation of mucous membranes, headache, drowsiness, allergic skin reaction
Notes for Physicians: Treat symptomatically; monitor for respiratory distress and neurologic effects
Suitable Extinguishing Media: Water spray, dry chemical powder, carbon dioxide, alcohol-resistant foam
Unsuitable Media: Direct water jet may spread burning material
Special Hazards: May emit toxic fumes under combustion including hydrogen chloride, phosgene, nitrogen oxides, and carbon monoxide
Advice for Firefighters: Use self-contained breathing apparatus and fully protective gear, keep containers cool by spraying with water, prevent fire-fighting runoff from entering waterways
Specific Fire Risks: Potential for explosive vapor-air mixtures in confined locations
Personal Precautions: Evacuate area, ensure adequate ventilation, use respiratory protection, avoid skin and eye contact with spilled material
Environmental Precautions: Prevent spillage from entering drains or water courses, alert environmental authorities if contamination occurs
Methods for Clean-up: Absorb with inert material such as sand or earth, sweep or shovel into tightly sealed containers, label and store for disposal, clean contaminated surface with detergent, avoid generation of airborne dust
Special Spill Instructions: Use only spark-proof tools during clean-up, remove ignition sources
Handling: Use personal protective equipment, minimize vapor and dust generation, avoid breathing vapors, do not eat, drink, or smoke during use, wash hands after handling
Storage Conditions: Store in cool, dry, well-ventilated area away from incompatible substances, keep container tightly closed, protect from heat sources and sunlight, segregate from oxidizers, acids, and bases
Incompatible Materials: Strong oxidizing agents, acids, bases, reducing agents
Engineering Controls: Local exhaust ventilation, safety showers, eyewash stations nearby
Exposure Limits: No established occupational exposure limits, follow best industrial hygiene standards and use preventive measures
Engineering Controls: Enclosed process systems, local exhaust ventilation, fume hoods
Personal Protective Equipment: Chemical-resistant gloves, flame-retardant or chemical-resistant clothing, safety goggles or face shield, approved respirators in settings with inadequate ventilation
Hygiene Measures: Remove contaminated clothing, wash before reuse, maintain good housekeeping standards
Environmental Controls: Prevent leaks or releases to the environment using secondary containment and spill response kits
Physical State: Liquid or crystalline solid depending on ambient temperature
Color: Pale yellow to colorless
Odor: Pungent, aromatic
Melting Point/Range: Not precisely determined; may vary by purity
Boiling Point/Range: Specific to compound, generally above 200°C
Flash Point: Measured using closed cup, approximate value needed for fire safety
Vapor Pressure: Low at typical storage temperatures
Density: Value at 20°C based on measured data
Solubility: Slightly soluble in water, freely soluble in most organic solvents
Partition Coefficient (log Pow): Expected to be high, favors partitioning into organic phase
Autoignition Temperature: Not established but estimated from similar compounds
Decomposition Temperature: Tends to decompose at elevated temperatures forming hazardous gases
Stability: Stable under standard storage and handling conditions
Conditions to Avoid: Elevated temperatures, direct sunlight, exposure to moisture
Materials to Avoid: Strong oxidizers, acids, bases, and reducers, alkali metals
Hazardous Decomposition Products: Toxic gases including chlorinated compounds, nitrogen oxides, carbon monoxide, carbon dioxide
Possibility of Hazardous Reactions: Violent reactions with oxidizing agents
Chemical Reactivity: Sensitive to moisture and prolonged exposure to air can degrade material
Likely Exposure Routes: Inhalation, skin and eye contact, accidental ingestion
Acute Toxicity: Harmful if swallowed or inhaled, potential for respiratory tract and mucous membrane irritation
Chronic Toxicity: Long-term exposure may lead to CNS effects, allergic skin reaction
Skin/Eye Effects: Irritation, potential for conjunctivitis, redness, pain
Sensitization: Risk of allergic sensitization following skin contact
Carcinogenicity: No classification from IARC, NTP, or OSHA for this specific compound
Mutagenicity/Reproductive Toxicity: Data lacking, avoid exposure pending further studies
Target Organ Effects: Eyes, skin, respiratory system, central nervous system
Ecotoxicity: High potential for acute toxicity to aquatic life due to chlorinated moiety
Persistence and Degradability: Slowly biodegradable, may persist in the environment
Bioaccumulation Potential: Expected to bioaccumulate in aquatic organisms through lipid partitioning
Mobility: Low water solubility reduces mobility in soil but binding to organic matter is likely
Adverse Environmental Impact: Spillage or chronic emission can harm water bodies and aquatic ecosystems
Waste Treatment Methods: Disposal at approved chemical waste facilities, incinerate using afterburner and scrubber to control emissions
Container Handling: Triple-rinse empty containers, puncture before recycling or disposal in accordance with local rules
Environmental Precautions: Do not dispose in drains, natural water bodies, or regular municipal waste
Special Disposal Instructions: Follow regional hazardous waste disposal laws and regulations, use a licensed contractor
UN Number: Assigned based on chemical classification
UN Proper Shipping Name: 1-(O-Chlorobenzyl)-1H-Pyrrole or chemical name matching official register
Transport Hazard Class: Class 6.1 Toxic substance (if applicable)
Packing Group: Value corresponding to level of hazard, typically II or III
Environmental Hazards: Marine pollutant
Special Precautions for Transport: Secure containers, ensure compatibility with vehicle or shipping method, emergency response guide available for drivers
Safety, Health, and Environmental Regulations: Subject to OSHA (United States), Hazard Communication Standard, European REACH, and applicable local legislation
U.S. Regulations: TSCA inventory listing, SARA Title III Section 313 notifiable due to environmental hazard
EU Classification: Subject to CLP Regulation (EC 1272/2008) on classification, labelling and packaging of substances
International Restrictions: Possibly restricted for export or specific use by international treaties and agreements
Workplace Labeling: Full hazard labelling required, Safety Data Sheet available to workers at point of use
Other Requirements: Chemical Inventory Management, employee training records, regulatory audits
