Product Name: 1-(3-Methoxypropyl)-4-Piperidinamine
Chemical Formula: C9H20N2O
Synonyms: 4-Amino-1-(3-methoxypropyl)piperidine
Manufacturer: [Company Name]
Use: Laboratory chemical, intermediate for organic synthesis
Contact: [Company address and emergency telephone number]
CAS Number: [Insert CAS Number Here]
GHS Classification: Acute Toxicity (Oral, Dermal), Skin Corrosion/Irritation, Eye Damage/Irritation
Signal Word: Warning
Hazard Statements: Harmful if swallowed, may cause skin and eye irritation, may cause respiratory irritation
Precautionary Statements: Avoid breathing dust or vapors, wash hands thoroughly after handling, wear protective gloves, eye and face protection recommended
Pictogram: Exclamation mark
Routes of Exposure: Inhalation, skin contact, ingestion, eye contact
Chemical Identity: 1-(3-Methoxypropyl)-4-Piperidinamine
Concentration: >98%
Impurities: None known at relevant percentages
Additives: No stabilizers or preservatives listed
Molecular Weight: 172.27 g/mol
Inhalation: Move individual to fresh air, keep comfortable for breathing, seek medical attention if symptoms persist.
Skin Contact: Wash exposed area thoroughly with plenty of soap and water. Remove contaminated clothing and shoes.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and continue rinsing.
Ingestion: Rinse mouth, do not induce vomiting unless directed by medical personnel, seek immediate medical advice.
Most Critical Symptoms: Burning sensation, coughing, red or irritated skin and eyes, nausea, difficulty breathing.
Suitable Extinguishing Media: Water spray, dry chemical, foam, carbon dioxide
Unsuitable Extinguishing Media: Do not use strong water jets
Specific Hazards: Produces toxic gases like nitrogen oxides and carbon monoxide during combustion
Special Protective Equipment: Firefighters need full protective clothing and self-contained breathing apparatus
Firefighting Instructions: Cool endangered containers with water spray from safe distance; avoid inhaling fumes; prevent firewater contamination
Hazardous Combustion Products: Nitrogen compounds, carbon oxides, and possible unknown toxic fumes
Personal Precautions: Evacuate area, ventilate space, wear protective equipment including gloves, goggles, and respirator
Environmental Precautions: Prevent further leakage or spillage if safe to do so, do not flush into surface water or sanitary sewer
Containment Methods: Absorb spill with inert material like sand or vermiculite; do not let chemical enter drains
Cleanup Procedure: Collect and place materials in appropriate containers for disposal, clean affected area fully to remove residue
Safe Handling Recommendations: Use only in well-ventilated areas, avoid direct contact with skin, eyes, and clothing, prevent formation of dust/vapors
Storage Conditions: Keep container tightly closed in a dry, cool, and well-ventilated place, away from incompatible substances
Incompatible Materials: Strong oxidizing agents, strong acids, reducing agents
Transfer Procedures: Use equipment designed to avoid splashing, spills, and emissions
Hygiene Practices: Do not eat, drink, or smoke during handling; wash hands thoroughly after handling
Control Parameters: No established occupational exposure limits; handle with standard precaution
Engineering Controls: Use local exhaust ventilation or appropriate engineering controls to keep exposure levels below limits
Personal Protective Equipment: Splash goggles, chemical-resistant gloves (nitrile recommended), protective clothing, use a NIOSH-certified respirator if ventilation is inadequate
Environmental Controls: Avoid release to the environment; follow best practices to minimize emissions and waste
Monitoring: Regularly monitor for chemical presence in work area air and on surfaces
Appearance: Clear to pale yellow liquid
Odor: Faint amine odor
Odor Threshold: Not determined
pH: Not available
Melting Point/Freezing Point: Not established
Boiling Point/Range: Approx. 235-240°C
Flash Point: >110°C (Closed cup)
Evaporation Rate: Not determined
Flammability: No specific data; treat as combustible
Upper/Lower Flammability Limits: Not determined
Vapor Pressure: Not available
Vapor Density: Not applicable
Relative Density: Approx. 0.97 g/cm³
Solubility: Soluble in water and organic solvents
Partition Coefficient (n-octanol/water): Not determined
Auto-Ignition Temperature: Not established
Decomposition Temperature: Not available
Viscosity: Not determined
Chemical Stability: Stable under normal storage and handling conditions
Reactivity: Reacts with strong oxidizing agents, acids, and some reducing agents
Hazardous Reactions: May produce hazardous gases under high heat or mixing with incompatible substances
Conditions to Avoid: Excessive heat, moisture, open flames, static discharge
Products of Decomposition: Carbon monoxide, carbon dioxide, nitrogen oxides, and possibly amines
Polymerization: No dangerous polymerization reported under normal conditions
Incompatibility: Avoid exposure to oxidizers, acids, and bases which can initiate hazardous reactions
Acute Toxicity: No detailed LD50 available, handle as potentially harmful by ingestion, inhalation, and skin exposure
Skin Corrosion/Irritation: May cause moderate skin irritation on prolonged contact
Serious Eye Damage/Irritation: Can cause redness, watering, and discomfort if splashed in eyes
Respiratory Sensitization: Irritation possible with inhalation of dust or vapor
Germ Cell Mutagenicity: No data available
Carcinogenicity: Not classified as carcinogenic based on available data
Reproductive Toxicity: No evidence found, handle with care due to lack of complete information
Repeated Dose Toxicity: Prolonged exposure can lead to irritation of mucous membranes and skin
Ecotoxicity: Limited data on aquatic or terrestrial toxicity, minimize release to environment
Persistence and Degradability: Not expected to persist under normal environmental conditions
Bioaccumulation Potential: Not likely to bioaccumulate due to water solubility
Mobility in Soil: Mobile in soil, potentially reaches ground water
Other Harmful Effects: Keep chemical away from water sources, minimize emissions given lack of eco data
Disposal Methods: Collect as hazardous waste, dispose in accordance with local, regional, and national regulations
Packaging Disposal: Empty containers and packaging should follow proper chemical waste procedures
Waste Code: Not assigned; use generator knowledge and local waste authority guidance
RCRA Status: Not regulated as hazardous waste under RCRA, check updates
Avoid Release: Prevent from draining into surface waters, sewers, or the environment
UN Number: Not assigned
Proper Shipping Name: Not regulated for transport under most modes
Transport Hazard Class: Not applicable
Packing Group: Not applicable
Labels Required: None required by DOT/IATA/IMDG
Special Precautions: Ensure container is sealed tightly, keep away from incompatible substances, transport with standard care to prevent spillage or exposure
Environmental Risks: Limit transport alongside food or sensitive goods, report large spills immediately to authorities
Global Inventory Status: Not listed on TSCA, REACH, or AICS without further notification
OSHA Regulatory Status: Not specifically regulated; treat with due caution
SARA Title III: Does not contain chemicals subject to emergency planning and notification requirements
California Proposition 65: Not listed as a chemical known to cause cancer or reproductive harm
Other Regulations: Users and handlers should reference national, regional, and local laws pertaining to safe chemical use and disposal; updates sometimes enacted rapidly
Workplace Controls: Strong safety training and emergency plans recommended; all users need ready access to data sheet and emergency contacts
